Z-150.4LX – Zapco 4-Channel 250W x 4 RMS Class AB LX Series Amplifier

Stable into 4-Ohms Bridged or 2-Ohms Stereo Load
Signal-to-Noise Ratio: >90dB
Channel Separation: >50dB

Category:

Z-150.4LX 4 Channel Class A/B Full Vary Sound QualityPower Amplifier Max RMS Power 1000 Watts at <0.5%THD The Z-150.4LX gives you 150 Watts of true Zapco power into four channels @ 4 ohms with the fidelity you need in the SQ class amplifiers. Rated Power Output: RMS Power, 4-Ohms Stereo: 150W x 4CH RMS Power, 2-Ohms Stereo: 250W x 4CH RMS Power, 4-Ohms Bridged: 500W x 2CH Signal-to-Noise Ratio: >90dB Frequency Response: 10Hz ~ 30KHz (+/-1dB) THD at RMS Watts: 0.05% Channel Separation: >50dB Fuse Rating: 35A x 2 Input Sensitivity: 200mV~8V (+/-5%) Dimensions: 7.48″ W x 2.46″ H x 18.82″ L Zapco Z Class A/B/D SQ Competition Amplifiers For the LX amplifiers we beefed up and controlled the facility provide, and doubled its potency, then redesigned the board and stripped it right down to do away with the whole thing no longer associated with sound quality. Then we upgraded the inner components to audiophile parts that You will not even in finding in such a lot prime-end home gear. The result’s openness, detail, depth of stage, and tonal accuracy unheard of in car audio amplifiers. These amps will set the sound quality standards for future years. The LX is an amp like no other! Most effective the most productive internal parts are used. Open such a lot amplifers… even “prime-end” amplifers, and you are going to in finding same old grade capacitors and ICs. Open an LX amp and You’ll be able to in finding Elna Silmic ll RFS caps and Nichicon KZ caps, designed in particular for top end home audio use. The Op-amps within the LX amplifiers are all Analog Devices OP275. You’ll be able to also in finding matched pairs of Sanken output devices. Where else will you in finding these parts and a car amp? You will not! We tightly regulated the facility provide, and the pre-amp segment, and we put ceramic and mica bypass caps in every single place on these amps, so You’ll be able to never have to fret about voltage fluctuations muddying up the sound of a Zapco Z-Series LX amp. We doubled the potency of the facility provide and added an additional filtering stage to cut back noise
Stable into 4-Ohms Bridged or 2-Ohms Stereo Load
Signal-to-Noise Ratio: >90dB
Channel Separation: >50dB
Input Sensitivity: 200mV~8V (+/-5%)
Dimensions: 7.48″ W x 2.46″ H x 18.82″ L

Reviews

There are no reviews yet.

Be the first to review “Z-150.4LX – Zapco 4-Channel 250W x 4 RMS Class AB LX Series Amplifier”

Your email address will not be published. Required fields are marked *