Sale!

Qbace CV Joint Banding Tool And Cutter

The perfect set for fast and simple tensioning and securing of CV boot banding strap.
CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.
This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use.

Usually ships in 24 hours

CV Clamp Banding Tool
Features:
The easiest set for quick and easy tensioning and securing of CV boot banding strap. CV boot clamp installer With a inbuilt cutter and winding mechanism the banding can also be tightened and cut briefly and effectively. This tool is very important for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and shaped handles for added comfort in use. Appropriate for ear-Kind hose clips found on fuel, cooling system and vacuum hoses. Will also be used for securing past due fashion GM CVJ boot clamps. Crimps and flattens clamps on ear Kind CV joint boot clamps.
Specifications
Heavy Duty
Relaxed double dipped handles
Hardened steel
CV boot clamp installer
For use with any banding as much as 10mm in width
CV Boot & Hose Clamp Pliers Ear Kind
Crimps and flattens clamps on ear Kind CV joint boot clamps
For putting in CV Clamps
Usual banding tool for CV Joint Boots
Instructions

1. Wrap free-finish Clamps 3/8 inch or 1/four inch roll band and clip around boot. Theread the band throught the nose of the tool and throughout the winding mandrel slot.
2. Place a half inch ratchet wrench at the winding mandrel and switch. When enough tension has been applied,rotate the tool over the boot, bending the band back onto the clip.
3.It applies tension and has a built-in cutter.
4. To finish clamping, fold down the remainder tail of the band into the clip and safe it by tapping down the ears of the clip. Note: for added strength, double-wrapped band is recomended.
The easiest set for quick and easy tensioning and securing of CV boot banding strap.
CV boot clamp installer With a inbuilt cutter and winding mechanism the banding can also be tightened and cut briefly and effectively.
This tool is very important for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and shaped handles for added comfort in use.
Appropriate for ear-Kind hose clips found on fuel, cooling system and vacuum hoses.
Will also be used for securing past due fashion GM CVJ boot clamps.

Brand
Color
EAN
EANList
ItemDimensions
Label
Manufacturer
ManufacturerPartsWarrantyDescription
MPN
PackageDimensions
PackageQuantity
PartNumber
ProductGroup
ProductTypeName
Publisher
Size
Studio
UPC
UPCList

Reviews

There are no reviews yet.

Be the first to review “Qbace CV Joint Banding Tool And Cutter”

Your email address will not be published. Required fields are marked *