pkg Pair of Alpine SWR-12D2 12″ Dual 2-Ohm Type-R Series Subwoofers and Alpine MRV-M1200 Monoblock 1200W RMS Class D Amplifier

SWR-12D2 – Power Handling: 1000W RMS | 3000W Peak Power | Sensitivity: 84 dB | Impedance: 2 Ohm | Frequency response: 24-200 Hz | Diameter: 12 Inch | Suggested Sealed Box Volume: 0.75-1.00 Cubic ft. | Suggested Ported Box Volume: 1.25-1.50 Cubic ft.
Mounting Depth: 6-3/8 Inches | Impedance: 2 Ohms | Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround | Frequency response: 24-200 Hz | Sensitivity: 84 dB | Top-mount depth: 6-3/8″ | Sealed box volume: 0.75-1.00 cu. ft. | Ported box volume: 1.25-1.50 cu. ft.
MRV-M1200 – Amplifier Type: Class-D (Digital) | Channel Design: 1 Channel (Mono) | Power Supply Design: DC-DC PWM Power Supply | Power Supply: MOSFET | Pre-Amp Stage: Discrete | Final Outputs: Power MOSFET | Crossover: Variable Lowpass Filter | Gain Control: Continuously Adjustable Gain Control | Bass EQ: Bass EQ Function | Remote Turn On: Remote Sensing Function (for Speaker Level Input) | Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection

Category:

ALPINE MRV-M1200 AMP 1 CHANNEL 2400W MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER NEW
SWR-12D2 – Energy Handling: 1000W RMS | 3000W Peak Energy | Sensitivity: 84 dB | Impedance: 2 Ohm | Frequency response: 24-two hundred Hz | Diameter: 12 Inch | Urged Sealed Box Extent: 0.seventy five-1.00 Cubic ft. | Urged Ported Box Extent: 1.25-1.50 Cubic ft.
Mounting Depth: 6-3/8 Inches | Impedance: 2 Ohms | Kevlar strengthened pulp cone with HAMRS Santoprene rubber surround | Frequency response: 24-two hundred Hz | Sensitivity: 84 dB | Best-mount depth: 6-3/8″ | Sealed box Extent: 0.seventy five-1.00 cu. ft. | Ported box Extent: 1.25-1.50 cu. ft.
MRV-M1200 – Amplifier Sort: Magnificence-D (Digital) | Channel Design: 1 Channel (Mono) | Energy Provide Design: DC-DC PWM Energy Provide | Energy Provide: MOSFET | Pre-Amp Degree: Discrete | Ultimate Outputs: Energy MOSFET | Crossover: Variable Lowpass Clear out | Acquire Keep watch over: Regularly Adjustable Acquire Keep watch over | Bass EQ: Bass EQ Serve as | Remote Flip On: Remote Sensing Serve as (for Speaker Degree Input) | Current Coverage: Over-Current, Over-Voltage, Beneath-Voltage and Thermal Coverage
Board Circuitry: S.T.A.R. Circuit | RCA Output: Non-Fading Pre-Amp Output (four Volts) | Speaker-Degree Inputs: four-channel Speaker Degree Inputs | Energy Indicator: Best Fastened Blue LED Energy Indicator | Thermal Keep watch over: Multi-Degree Energy Limits | Energy Necessities: 14.4 V.DC (eleven-16V allowable) | Input Sensitivity (RCA Input): 0.15 – 4.0 V | Input Sensitivity (Speaker Degree Input): 0.4 – 10 V | Input Impedance: >10k ohms
Frequency Response (+zero, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -four hundred Hz | Damping Issue (10W into 4 Ohms at 100Hz): >750 | Signal to Noise (Rated Energy into 4 Ohms): >one hundred and five dB | Preamp Output: 4.0V Max. | RMS Energy Ratings | Per ch into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N) | Per ch into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N) | Max Energy Output Ratings | Total Max Energy: 2400 W | Dimensions: Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in | Warmth Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in [amz_corss_sell asin="B06XH7WR1K"]

Reviews

There are no reviews yet.

Be the first to review “pkg Pair of Alpine SWR-12D2 12″ Dual 2-Ohm Type-R Series Subwoofers and Alpine MRV-M1200 Monoblock 1200W RMS Class D Amplifier”

Your email address will not be published. Required fields are marked *