Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and serve as – cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear subject matter promoting fluid integrity. Each and every unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 chrome steel, in such a lot applications no gasket or sealant is needed, and all Mag-Hytec parts are covered by an entire life limited warranty. Rely on Mag-Hytec if you find yourself pulling a heavy load.
Steer clear of costly reapirs – Extend the lifetime of your Vehicle – Expand oil Capacity – Runs Cooler, Lasts Longer
Average of double the fluid capacity
Ease of Service
The dipstick is knurled for fast removal, the flat is marked low/high to test lube level and a magnet, which acts as an open clear out is within the lower end. The MS 7/8 – 14 THD port is big enough to make use of for filling.
The magnet-filled drain plug is identical MS port as the dipstick. Both the dipstick and drain are O-ring sealed.
The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.
The calibration plug is centered at the serial number plate and approximates the stock cover fill plug for factory fluid level.
The O-ring is snapped into the inverted “V” groove for a positive seal without gasket or silicone.
Plugs, cap screws and washers are chrome steel in such a lot applications.
Mag-Hytec manufactures the most efficient covers and pans to be had nowadays.
Overall height 3 5/8″
Includes: Bolt kit, Drain Plug and Dip Stick.
Capacity: 8 Quarts
This cap is the proper cover in your 14 bolt – 11.5″ differential, despite the fact that there are handiest 12 bolt holes. The highest and bottom bolts have been got rid of for drain plug and temperature sending unit hole.
Bolt Pattern has one most sensible and one bottom bolt @ 12:00 O’clock & 6:00 O’clock for fast identification.