HIFONICS Goliath 35th Aniv 3000 Watt RMS Competition Car Mono Amplifier+Amp Kit

3000 Watt RMS Competition Car Mono Amplifier. Pre-Amp Circuitry: Low Noise PreAmplifier – Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion. Inputs: Tiffany Style RCA Connectors – Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection. Operation Mode: One Channel (Mono) – Mono mode is intended for subwoofers only.
Crossover / Signal Shaping: Accu-Cross & XCurve (X1/X10) – Accu-Cross crossovers allow for complete control of the signal directing to all speakers. XCurve allows for chosen frequencies to be as stated (X1) or multiplied by 10. Equalizer: ParaQ – Parametric Bass EQ with adjustments: Boost (0-10dB) Width (Narrow-Wide (On Center) Center Frequency (30Hz – 100Hz)
Class / Topology: Ultra D-ClassTM – The proprietary “Ultra D-Class” design uses high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels. Hifonics Ultra D-Class results in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.

Category:

Goliath is a traditional mono amplifier designed around Hifonics Super D-ClassTM topology. Very similar to Colossus in design, the Goliath lets in More than one mono amplifiers to be strapped in combination utilizing the Master/Slave feature to create a big subwoofer system which will well exceed 6000 watts RMS.
Signal Path
The signal path for Goliath uses the similar ParaQTM circuit to keep an eye on the bass equalization. Colossus, Goliath and Helios be offering an additional output set of RCA jacks to do away with the desire for splitter cables. Again, the Hifonics engineers attempt to do away with the extra signal paths that may affect sound quality by raising distortion levels.

Features:

HIFONICS Goliath 35th Anniversary 3000 Watt RMS Competition Car Mono Amplifier
Pre-Amp Circuitry: Low Noise PreAmplifier – Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion
Inputs: Tiffany Style RCA Connectors – Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
Operation Mode: One Channel (Mono) – Mono mode is meant for subwoofers only
Crossover / Signal Shaping: Accu-Cross & XCurve (X1/X10) – Accu-Cross crossovers allow for complete keep an eye on of the signal directing to all speakers. XCurve lets in for chosen frequencies to be as stated (X1) or multiplied by 10.
Equalizer: ParaQ – Parametric Bass EQ with adjustments: Spice up (0-10dB) Width (Narrow-Wide (On Center) Center Frequency (30Hz – 100Hz)
0 Gauge Power Amplifier Installation Kit
Designed particularly for car audio systems over 1000 watts RMS to 3000 Watts
Made from silver-tinned one hundred% virgin copper for a pure uninterrupted transfer of power and signal
The solid brass gold plated ANL Fuse Holder offers ideal protection for prime powered systems
Strand Count: 4704
BC-5W2 Compliant
3000 Watt RMS Competition Car Mono Amplifier. Pre-Amp Circuitry: Low Noise PreAmplifier – Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion. Inputs: Tiffany Style RCA Connectors – Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection. Operation Mode: One Channel (Mono) – Mono mode is meant for subwoofers handiest.
Crossover / Signal Shaping: Accu-Cross & XCurve (X1/X10) – Accu-Cross crossovers allow for complete keep an eye on of the signal directing to all speakers. XCurve lets in for chosen frequencies to be as stated (X1) or multiplied by 10. Equalizer: ParaQ – Parametric Bass EQ with adjustments: Spice up (0-10dB) Width (Narrow-Wide (On Center) Center Frequency (30Hz – 100Hz)
Class / Topology: Ultra D-ClassTM – The proprietary “Ultra D-Class” design uses high-speed microprocessors with proprietary D/A conversion algorithms to efficiently keep an eye on the present consumption. At very high listening levels. Hifonics Ultra D-Class ends up in lower distortion, higher current efficiencies and not more heat than conventional D-Class amplifier designs.
Output Devices Technology: Ultra-FiTM MOSFET – The Ultra-FiTM MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion Heat Sink: Aluminum – Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it may be cooled without the desire for fans
Output Connections: Nickel-Plated – High temperature affect resistant with hex screw terminals that permit for protected connections and is erosion resistant Connections Type: Molded & Angled – Hardened composite mounting with protected connection for all Power, Ground and Speaker connections. Angled for ease of get admission to right through installation

Reviews

There are no reviews yet.

Be the first to review “HIFONICS Goliath 35th Aniv 3000 Watt RMS Competition Car Mono Amplifier+Amp Kit”

Your email address will not be published. Required fields are marked *